Rack Set 50 Teeth long, Module 1.0mm, 20 Degree Pressure Angle

Basics:

These racks are to recognised industry standards for module system gears with an involute tooth profile.

Module 1.0 gears have a tooth spacing of approximately 3.1mm.

20 Degree Pressure Angle gives a tooth profile that is suitable for plastic.

These racks have been 3D printer tested, however it should be noted that producing of teeth of this fine pitch can be a challenging for some printers and software.

Presentation images are of the actual .STL files.

What You Get:

A total of 4 files!

STL files for four types of rack.

A simple rack, a deep rack, a rack with a flange on one side, a rack with a flange on both sides.

Why?

There are lots of racks available to print, but most are not to recognised standards, let alone a complete and useful set!

Help!

If you encounter any issues with these, please let me know! Creating these is highly repetitive and mistakes can happen! If you need gears with other teeth numbers, modules and pressure angles, let me know. More gear sets of different module to follow!