Description:

This is a detailed, textured 3D model of the NASA Crawler Transporter vehicle

Technical Notes:

This is a High Definition ready model of the NASA Crawler Transporter vehicle designed to transport assembled space vehicles from the Vehicle Assembly building to their launch pad, at Cape Canaveral.

All components are appropriately separated and pivoted for animation purposes.

History:

The Crawler-Transporter is a tracked vehicle used to transport the Saturn V rocket, and now the Space Shuttle, from NASA's Vehicle Assembly Building to the launchpad on a Mobile Launcher Platform.

The Crawler-Transporter, built by the Marion Power Shovel Co. at a cost of $14 million, was once the largest tracked vehicle in the world; it has since been surpassed by the Bagger 288 German excavator. It has eight tracks, two on each corner; each track has 57 shoes, and each shoe weighs approximately 900 kg (about one short ton). It measures 131 ft by 114 ft (40 m by 35 m); the height from ground level to the platform is adjustable from 20 to 26 ft (6 to 8 m). The transporter weighs 6 million pounds (2,700 t).

It is powered by 16 traction motors, powered by four 1,000 kW generators, driven by two 2,750 hp (2050 kW) diesel engines. Two 750 kW generators, driven by two 1,065 hp (794 kW) engines, are used for jacking, steering, lighting, and ventilating. Two 150 kW generators are also available to power the Mobile Launcher Platform. The crawler consumes 150 US gallons of diesel fuel per mile (350 L/km); its tanks hold 5,000 US gallons (19 m³).

The maximum speed of the Crawler-Transporter is about one mile per hour (1.6 km/h) loaded, or two miles per hour (3 km/h) unloaded; average trip time from the Vehicle Assembly Building to the launchpad is between five and eight hours. Pad A is 3.5 miles (5.6 km) from the VAB, Pad B is 4 miles (6.4 km). It is controlled from two control cabs located at either end of the vehicle.

In order to keep the rocket from toppling over, the tip is kept vertical within