A tidy break, all in one place. This one-piece snack tray combines a centered phone ledge, a rear-corner cup ring, and a generous open area for a sandwich or other snack.

MODEL DETAILS
• One polygonal mesh, 844 triangles and 424 vertices.
• Dimensions: 300 × 220 × 23 mm, modeled at real-world scale.
• Non-overlapping UVs and a single PBR material.
• Four 1024 × 1024 PNG texture maps: base color, metallic, roughness and normal.
• Static model; not rigged or animated.

INCLUDED
The tray model and its material textures. The phone, mug, food and paper shown in the context render are illustrative props and are not included.

3D PRINTING
A separate STL is provided in millimeters. The one-piece model needs a build area larger than 300 × 220 mm, with allowance for clearance or a brim. The STL was digitally sliced without supports at 0.2 mm layers and 15% infill, but has not been physically printed or tested.

The phone ledge has a nominal 15 mm gap; check your phone and case. Landscape phones may overlap the cup area. Cup ring inside diameter is approximately 86 mm. The ring is not spill-proof. Use a suitable food-contact liner or separate plate, and choose material appropriate for the cup temperature.