Oferta specjalna! Poza

:::
Tylko wybrane elementy. Zobacz więcej ofert w Moje konto.

OPTYCZNA rura UNI Firebur Model 3D

$24.95
lub
Licencja bezpłatna
- Wszystkie rozszerzone zastosowania
Zawarte formaty
ALL-WEATHER SIGNAAL 3.jpg
fire resistant signal cable 1x4x0.8mm 3.jpg
Armed optical cable 2.JPG

Nie widzisz formatu pliku, którego potrzebujesz?

Darmowa konwersja formatu pliku

Pełna pewność

Mieć pytania? Porozmawiaj teraz z nami.

Czat na żywo Teraz 24/7
3D Model Specyfikacje
ID produktu:431034
Opublikowany:
Geometria:Unknown
Wielokąty:0
Wierzchołki:0
Tekstury:No
Materiały:No
Rigowany:No
Animowany:No
UV Mapping:Yes
Nieopakowane UV:Unknown
Artysta
TurboSquid Sprzedawca od September 2007
Obecnie sprzedaje 280 produkty
Osiągnięcia:
Ocena produktu
nieoceniony
opis
OPTICAL UNI-tube Firebur

An optical fiber (or fibre) is a glass or plastic fiber that carries light along its length. Fiber optics is the overlap of applied science and engineering concerned with the design and application of optical fibers. Optical fibers are widely used in fiber-optic communications, which permits transmission over longer distances and at higher data rates (a.k.a 'bandwidth') than other forms of communications. Fibers are used instead of metal wires because signals travel along them with less loss, and they are also immune to electromagnetic interference. Fibers are also used for illumination, and are wrapped in bundles so they can be used to carry images, thus allowing viewing in tight spaces. Specially designed fibers are used for a variety of other applications, including sensors and fiber lasers.
Light is kept in the 'core' of the optical fiber by total internal reflection. This causes the fiber to act as a waveguide. Fibers which support many propagation paths or transverse modes are called multi-mode fibers (MMF). Fibers which can only support a single mode are called single-mode fibers (SMF). Multi-mode fibers generally have a larger core diameter, and are used for short-distance communication links and for applications where high power must be transmitted. Single-mode fibers are used for most communication links longer than 200 meters.

Joining lengths of optical fiber is more complex than joining electrical wire or cable. The ends of the fibers must be carefully cleaved, and then spliced together either mechanically or by fusing them together with an electric arc. Special connectors are used to make removable connections.

Produkty powiązane
Więcej produktów według artystów