Oferta specjalna! Poza

:::
Tylko wybrane elementy. Zobacz więcej ofert w Moje konto.
Sprzedaż

Światłowód DQ-line Loose Tube LT Model 3D

Licencja na model 3D: Standard    Licencja na aktualizację
FORMATY
3ds Max
Other
Inne pliki
Armed optical cable 3.JPG
4x2x0.5mm² instrumantation cable 5.jpg
Power cable ARMOURED 3x150mm 1.JPG
SIGNAL CABLE ORANGE 5.JPG
Optical fibre DQ-line Loose Tube LT2.JPG
S-FTP PiMF Cat7 PUR PATCH FIRE RESITANT SIGNAL CABLE 5.JPG
3D Model Specyfikacje
0 Wielokąty
0 Wierzchołki
Unknown Geometria
UV Mapping
Unknown Nieopakowane UV
ID produktu: 431284
279 Produkty
Od 2007

Mieć pytania? Porozmawiaj teraz z nami.

24/7 czat na żywo
Optical fibre DQ-line Loose Tube LT

An optical fiber (or fibre) is a glass or plastic fiber that carries light along its length. Fiber optics is the overlap of applied science and engineering concerned with the design and application of optical fibers. Optical fibers are widely used in fiber-optic communications, which permits transmission over longer distances and at higher data rates (a.k.a 'bandwidth') than other forms of communications. Fibers are used instead of metal wires because signals travel along them with less loss, and they are also immune to electromagnetic interference. Fibers are also used for illumination, and are wrapped in bundles so they can be used to carry images, thus allowing viewing in tight spaces. Specially designed fibers are used for a variety of other applications, including sensors and fiber lasers.
Light is kept in the 'core' of the optical fiber by total internal reflection. This causes the fiber to act as a waveguide. Fibers which support many propagation paths or transverse modes are called multi-mode fibers (MMF). Fibers which can only support a single mode are called single-mode fibers (SMF). Multi-mode fibers generally have a larger core diameter, and are used for short-distance communication links and for applications where high power must be transmitted. Single-mode fibers are used for most communication links longer than 200 meters.

Joining lengths of optical fiber is more complex than joining electrical wire or cable. The ends of the fibers must be carefully cleaved, and then spliced together either mechanically or by fusing them together with an electric arc. Special connectors are used to make removable connections.

Produkty powiązane
Więcej produktów według artystów