Craft ZoomAndFocusCam

Custom License
CRAFT ANIMATIONS & ENTERTAINMENT AB END USER LICENSE AGREEMENT (EULA)
for any of Craft Animations & Entertainment AB's software.


Below, all instances of 'the Product(s)' refers to the product(s) you are about to install.


IMPORTANT -- READ CAREFULLY:
This Craft Animations & Entertainment AB End User License Agreement ('License Agreement') is a legal agreement between you (either an individual or an entity) and Craft Animations & Entertainment AB ('Craft') a limited company under Swedish law with residence in Gothenburg, Sweden. By pressing the 'I Agree' button, installing, copying or otherwise using the Product(s), you agree to be bound by the terms of this License Agreement. If you do not agree to any of the terms of this License Agreement, then do not open, install, distribute or use this copy of the Product(s) software (click on the 'Cancel' button).


GENERAL
This is a license agreement and NOT an agreement for sale. Under this License Agreement Craft grants to you a non-exclusive license to use the Product(s), which is software and documentation. The Product(s) itself as well as the copy of the Product(s) or any other copy you are authorized to make under this contract remain the property of Craft at all times.
Craft is willing to license the Product(s) to you only on the condition that you accept all of the terms contained in this License Agreement.

USE OF THE PRODUCT(S)
Craft grants you a nonexclusive license to use the Product(s) and its manual and other accompanying printed material and “online” or electronic documentation with equipment owned by you or under your control, according to the terms and conditions of this License Agreement. This Agreement permits you to install and use the Product(s) on only one computer at one location at any one time.

RESTRICTIONS
You may not rent, lease, sublicense or lend the Product(s) or documentation. You may, however, transfer all your rights to use the Product(s) to another person or legal entity provided that you transfer this agreement, the Product(s), including all copies, updates or prior versions. You must inform Craft in writing about a license transfer and the new user has to sign and accept this license agreement. In case of such a transfer the license of the former user expires and all remaining data covered by this license must be deleted/destroyed.
You may not copy or use the Product(s) or Documentation except as permitted by this License Agreement.
You may not reverse engineer, decompile, or disassemble the Product(s) except to the extent permitted by law where this is indispensable to obtain the information necessary to achieve interoperability of an independently created program with the Product(s) or with another program and such information is not readily available from Craft or elsewhere.
You may not remove, alter, or obscure any proprietary notices, labels, or marks from the Product(s) or documentation.
You may not utilize any equipment, device, software, or other means designed to circumvent or remove any form of copy protection used by Craft in connection with the Product(s), or use the Product(s) together with any authorization code, serial number, or other copy protection device not supplied by Craft directly or through an authorized reseller.
You may not alter this license agreement or any of the installed documents and files.

LIMITED WARRANTY
SPECIAL EFFECTS AND SIMULATION PLUG-INS ARE TOOLS INTENDED TO BE USED BY TRAINED PROFESSIONALS ONLY. Craft WARRANTS THAT the Product(s) WILL PERFORM IN ACCORDANCE WITH THE DOCUMENTATION. Craft CAN NOT WARRANT THAT the Product(s) WILL WORK TOGETHER WITH OTHER SOFTWARE AND PLUG-INS FROM OTHER 3RD PARTY DEVELOPERS, BECAUSE OF THE COMPLEXITY OF SUCH INTERACTIONS BETWEEN DIFFERENT OPERATING SYSTEMS OR SOFTWARE PACKAGES. THE USER MAY HOWEVER IMMEDIATELY REPORT SUCH INCOMPATIBILITIES FOR FURTHER INSPECTION BY Craft. SUCH A REPORT HAS TO BE DONE IN WRITING.

WARRANTY DISCLAIMER
THE INFORMATION IS PROVIDED 'AS IS' WITHOUT WARRANTY OF ANY KIND. Craft DISCLAIMS ALL WARRANTIES, EITHER EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL Craft OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF Craft OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.
Craft's LIABILITY WITH REGARD TO YOU UNDER THIS LICENSE AGREEMENT SHALL UNDER ALL CIRCUMSTANCES BE LIMITED TO THE AGGREGATE LICENCE FEES FOR THE SOFTWARE PAID BY YOU HEREUNDER.

CONFIDENTIALLY
All Licensing information, including license files, descriptions of code activation and written instructions of any kind created by Craft are only intended for the licensed user of the Product(s) and no one else. Such information may not be spread or distributed in any form to other users.

REGISTRATION DATA
For the purpose of customer registration and control of proper use of the programs Craft will store personal data of the users in accordance with the Swedish law on Personal Privacy and Data Protection. This data may only be used for the above-mentioned purposes and will not be accessible to third parties.

TERMINATION
This License Agreement may be voluntary terminated by either Party providing that the terminating Party have remained in compliance with each of the terms of this License Agreement at all times prior to termination. Notice of termination shall be made in writing. This License Agreement terminates six months after such notice is sent by the terminating Party.
Craft shall have the right to terminate this License Agreement with immediate effect if
a.you are in default of any of your obligations under this Agreement, including, but not limited to violation of the limitation of the right of use of the Product(s);
b.you fail to execute any agreed payments and you have failed to make good such default within ten calendar days after having received written notice from Craft requiring you to do so.
Craft shall furthermore have the right to terminate this License Agreement with immediate effect if you suspend your payments, become bankrupt or insolvent or enter into liquidation or otherwise can be regarded as insolvent or if you or a representative of yours commits a criminal offence in connection with the fulfilment of this License Agreement.

TERMINATION CONSEQUENCES
Upon termination of this License Agreement, regardless of reason, you agree to cease all use of the Product(s) and to uninstall all copies of the Product(s).
Upon termination of this License Agreement, regardless of reason, all debts owed by you to Craft shall become due and payable.

ASSIGNABILITY
You agree not to assign, transfer or delegate by contract, merger, sale or acquisition of assets, operation of law, or otherwise, any portion of this License Agreement without our prior written consent from Craft. Any assignment, transfer or delegation in violation of the foregoing sentence will be null and void.

SEVERABILITY
If any provision of this License Agreement is found to be invalid or otherwise unenforceable, the further conditions of this Agreement will remain fully effective and the parties will be bound by obligations which approximate, as closely as possible, the effect of the provision found invalid or unenforceable, without being themselves invalid or unenforceable.

ENTIRE AGREEMENT
You agree that this License Agreement is the entire agreement between you and Craft, and that it supersedes any prior agreement, whether written or oral, and all other communications between Craft and you relating to the subject matter of this Agreement.

GOVERNING LAW AND VENUE
The validity, interpretation, construction and performance of these General Terms and Conditions shall be governed by the laws of the Kingdom of Sweden.
The District Court of Göteborg, Sweden, shall have exclusive jurisdiction and venue over any dispute arising out of these General Terms and Conditions.

BY INSTALLING AND AUTHORIZING THIS SOFTWARE, YOU HEREBY AGREE TO THE TERMS AND CONDITIONS PRESENTED ABOVE.
Included Formats
Other 10.1
Specifications
Product ID:422747
Published:
Category:Animation Controller
Version:10_1
Host Application:Other ( See Notes )
Host Version:
Operating System:Multiple ( See Notes )
Artist
TurboSquid Member Since August 2008
Currently sells 18 products
Achievements:
Unrated
Product Rating
Description
Craft ZoomAndFocusCam gives you the ability to create and control focus effects in real time. Animators can now shift focus between two points in real time. This can either be done gradually or suddenly, and it doesn't matter whether the two points are in motion - this creates the perfect solution for real time cinematics.

•        Shift focus easily between two points.
•        Shift focus gradually or suddenly.
•        Analog control of focus and zoom.

This install supports the following versions of your favorite 3D applications:

  • Autodesk 3ds Max
    • 3ds Max 8
    • 3ds Max 9 (32-bit & 64-bit)
    • 3ds Max 2008 (32-bit & 64-bit)
    • 3ds Max & 3ds Max Design 2009 (32-bit & 64-bit)
    • 3ds Max & 3ds Max Design 2010 (32-bit & 64-bit)
    • 3ds Max & 3ds Max Design 2011 (32-bit & 64-bit)

  • Autodesk Maya
    • Maya 7.0
    • Maya 8.0 (32-bit & 64-bit)
    • Maya 8.5 (32-bit & 64-bit)
    • Maya 2008 (32-bit & 64-bit)
    • Maya 2009 (32-bit & 64-bit)
    • Maya 2010 (32-bit & 64-bit)
    • Maya 2011 (32-bit & 64-bit)

  • Autodesk Softimage
    • Softimage 7.5 (32-bit & 64-bit)
    • Softimage 2010 (32-bit & 64-bit)
    • Softimage 2011 (32-bit & 64-bit)

  • Maxon CINEMA 4D
    • CINEMA 4D R10 (32-bit & 64-bit)
    • CINEMA 4D R11 (32-bit & 64-bit)
    • CINEMA 4D R11.5 (32-bit & 64-bit)

Related Products
More Products by Artist