Lifestealer N'AIX DOTA 2

Editorial Uses Allowed
Extended Uses May Need Clearances
The brand 'valve software' has been associated with this product. Editorial uses of this product are allowed, but other uses (such as within computer games) may require legal clearances from third party intellectual property owners. Learn more.
Included Formats
Maya 2015 Other
Autodesk FBX
3D Model Specifications
Product ID:990461
Geometry:Polygonal Quads/Tris
UV Mapped:No
Unwrapped UVs:No
TurboSquid Member Since March 2014
Currently sells 6 products
Product Rating
Lifestealer N'AIX
This 3D model has been modeled in MAYA and ZBrush simultaneously. It was converted into several file formats, such as .OBJ and .STL (3D printing file format). The .STL file has been repaired and corrected in Netfabb and executed in CURA 15.06 (printing software from ULTIMAKER) and Repetier Host. Results show no error. You can see screenshots from the software in the models photo gallery. This model does not have UV (you dont need UV for printing). The size of the model is not specified because you can adjust it individually, according to your preferences, or the software will automatically set the size according to your printers heated bed (I recommend a length of no less than 18cm). The file measures 75.5Mb and will be uploaded more slowly to the printing software; however you will be surprised by the result. For a smoother and more quality printing, apply the following settings in CURA printing software:


Layer height: 0.1mm
Initial layer thickness: 0.3mm
Bottom/top pattern: lines
Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).
The model has been tested and printed in PLA.
Speed setups:

Infill speed: 50mm/s
Outer shell speed: 30mm/s
Inner shell speed; 20mm/s
Top/bottom speed: 20mm/s
Support speed: 50mm/s
Travel speed: 100mm/s
Skirt speed: 30mm/s
Amount of slower layers: 4

Infill pattern: Grid
Line distance: 3mm
Infill overlap: 20%
Infill layers: 0

Enable support: Check
Placement: Everywhere
Overhang angle: 30
X/Y distance: 0.7mm
Top distance: 0.2mm
Bottom distance: 0.2mm
Stair step height: 0.5mm
Join distance: 0.7mm
Area smoothing: 0.6mm
Use towers: Check
Pattern: Lines
Line distance: 1.0mm
Platform adhesion:

Type: Brim
Brim line count: 10 (up to 20, depending on the models height)
Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s setting apply to avoid model deformation. Other settings by default.
Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.
Related Products
More Products by Artist