This model is of an repair kit/ upgrade kit for the Imperial Shuttle by Kenner sold in the eighties. In case the wing mechanism was broken as displayed in the photos (picture 1), you can repair this with a 3d print of the offered 3d model. I myself printed the 3d model with a Dremel 3d printer in standard resolution and installed it in my shuttle, it worked perfectly. It is not necessary to glue the printed model, therefore it is at any time possible to rebuild the original state. You can as well use the kit to upgrade fully functioning shuttles in order to prevent possible breakage of the wing mechanism.
The model was built in 3ds Max. Unit system is set to metric. Model is built to real-world scale.
All objects and materials are named systematically.
The materials are Standard materials using the 'scanline' renderer.
Dremel 3d print file in standard resolution.
The use oft the repair kit/ upgrade kit is at own risk.
Depending on the quality of the Imperial Shuttle or the 3d print a rework will be necessary.
Please assure that when using the STL file the correct scaling is considered. The details of the dimensions can be taken from the 3ds max file.
In case you would like to use the Autodesk Print Studio, please assure that the unit system is set to cm.